Second Wind - C3
Anemometer
The C3 Anemometer is an improved version of the
popular three-cup design used in wind
assessments for decades, manufactured to precise
industry standards. The Model C3 rotor is made
of tough polycarbonate for exceptional
durability and reliability. The Model C3 sensor
base is also made of rugged polycarbonate,
making it more resistant to damage during
installation.
NRG# 200P Windvane
The #200P wind direction vane is professional
qualify sensor originally designed for use in
the world's large wind power plants. The
thermoplastic and stainless steel components
resist corrosion, and contribute to a high
strength to weight ratio and is very stable and
smooth response to wind changes. The vane is
directly connected to a precision conductive
plastic potentiometer located in the main body.
Secondwind - C3C
Calibrated Anemometer
Our Model C3C anemometer has been calibrated at
the highly respected Massachusetts Institute of
Technology’s Wright Brothers wind tunnel. The
C3C Anemometer is an improved version of the
popular three-cup design used in wind
assessments for decades, manufactured to precise
industry standards. The rotor is made of tough
polycarbonate for exceptional durability and
reliability. The sensor base is also made of
rugged polycarbonate, making it more resistant
to damage during installation.
SWI Thermister with
Radiation Shield
The SWI Thermister is designed specifically for
use with the nomad 2 wind resource assessments
data logger. It consists of a 10K type
thermistor encased in a aluminum shaft, and
comes pre wired with 3.5 meter of sensor cable
with radiation shield to minimize errors from
gains due to direct sunlight. The sensor is
ideal for collecting temperature data for energy
density calculations and monitoring air
temperature at remote sites.
The six plated shield can be mounted to a 1 to 2
inch diameter pipe with a U-bolt clamp or a
larger diameter tower with hose clamp.
Setra Barometric Pressure
transducer
Setra systems has been a technology leader in
environmental pressure measurement for over
three decades. The model 276 is an extremely
accurate and stable transducer based on the
proven setracreamTM sensing element.
Another major features of the 276 is setra's
custom application specific integrated circuit
(ASIC). The ASIC works hand in hand with the
setracreamTM sensor to achieve long
term stability and high accuracy.
Li-Cor-2005Z Pyanometer
Kit
The licor Pyanometer kit is designed for a field
measurement
of global solar radiation in
agricultural, metrological and solar energy
studies. In clear unobstructed daylight
conditions the LICON Pyronometer compares
favorably with first class thermopile type
Pyronometer but is prices at a
fraction of the
cost.
Vaisala Humidity Sensor
The Vaisala Intercap Humidity and Temperature
Probe HMPSO is a simple and cost effective
humidity transmitter suitable for volume
application on integration into other
manufacturer equipment. Because of its very low
current consumption and short up 4me. The 4MP50
is well suitable for battery powered
applications.
Second Wind - C3
Anemometer
Secondwind - C3C
Calibrated Anemometer
Setra Barometric Pressure
transducer
Vaisala Humidity Sensor
